CWE

Common Weakness Enumeration

A community-developed list of SW & HW weaknesses that can become vulnerabilities

New to CWE? click here!
CWE Most Important Hardware Weaknesses
CWE Top 25 Most Dangerous Weaknesses
Home > CWE List > CWE- Individual Dictionary Definition (4.15)  
ID

CWE-1276: Hardware Child Block Incorrectly Connected to Parent System

Weakness ID: 1276
Vulnerability Mapping: ALLOWEDThis CWE ID may be used to map to real-world vulnerabilities
Abstraction: BaseBase - a weakness that is still mostly independent of a resource or technology, but with sufficient details to provide specific methods for detection and prevention. Base level weaknesses typically describe issues in terms of 2 or 3 of the following dimensions: behavior, property, technology, language, and resource.
View customized information:
For users who are interested in more notional aspects of a weakness. Example: educators, technical writers, and project/program managers. For users who are concerned with the practical application and details about the nature of a weakness and how to prevent it from happening. Example: tool developers, security researchers, pen-testers, incident response analysts. For users who are mapping an issue to CWE/CAPEC IDs, i.e., finding the most appropriate CWE for a specific issue (e.g., a CVE record). Example: tool developers, security researchers. For users who wish to see all available information for the CWE/CAPEC entry. For users who want to customize what details are displayed.
×

Edit Custom Filter


+ Description
Signals between a hardware IP and the parent system design are incorrectly connected causing security risks.
+ Extended Description

Individual hardware IP must communicate with the parent system in order for the product to function correctly and as intended. If implemented incorrectly, while not causing any apparent functional issues, may cause security issues. For example, if the IP should only be reset by a system-wide hard reset, but instead the reset input is connected to a software-triggered debug mode reset (which is also asserted during a hard reset), integrity of data inside the IP can be violated.

+ Common Consequences
Section HelpThis table specifies different individual consequences associated with the weakness. The Scope identifies the application security area that is violated, while the Impact describes the negative technical impact that arises if an adversary succeeds in exploiting this weakness. The Likelihood provides information about how likely the specific consequence is expected to be seen relative to the other consequences in the list. For example, there may be high likelihood that a weakness will be exploited to achieve a certain impact, but a low likelihood that it will be exploited to achieve a different impact.
ScopeImpactLikelihood
Confidentiality
Integrity
Availability

Technical Impact: Varies by Context

+ Potential Mitigations

Phase: Testing

System-level verification may be used to ensure that components are correctly connected and that design security requirements are not violated due to interactions between various IP blocks.
+ Relationships
Section HelpThis table shows the weaknesses and high level categories that are related to this weakness. These relationships are defined as ChildOf, ParentOf, MemberOf and give insight to similar items that may exist at higher and lower levels of abstraction. In addition, relationships such as PeerOf and CanAlsoBe are defined to show similar weaknesses that the user may want to explore.
+ Relevant to the view "Research Concepts" (CWE-1000)
NatureTypeIDName
ChildOfPillarPillar - a weakness that is the most abstract type of weakness and represents a theme for all class/base/variant weaknesses related to it. A Pillar is different from a Category as a Pillar is still technically a type of weakness that describes a mistake, while a Category represents a common characteristic used to group related things.284Improper Access Control
Section HelpThis table shows the weaknesses and high level categories that are related to this weakness. These relationships are defined as ChildOf, ParentOf, MemberOf and give insight to similar items that may exist at higher and lower levels of abstraction. In addition, relationships such as PeerOf and CanAlsoBe are defined to show similar weaknesses that the user may want to explore.
+ Relevant to the view "Hardware Design" (CWE-1194)
NatureTypeIDName
MemberOfCategoryCategory - a CWE entry that contains a set of other entries that share a common characteristic.1197Integration Issues
+ Modes Of Introduction
Section HelpThe different Modes of Introduction provide information about how and when this weakness may be introduced. The Phase identifies a point in the life cycle at which introduction may occur, while the Note provides a typical scenario related to introduction during the given phase.
PhaseNote
ImplementationThis weakness is introduced when integrating IP into a parent design.
+ Applicable Platforms
Section HelpThis listing shows possible areas for which the given weakness could appear. These may be for specific named Languages, Operating Systems, Architectures, Paradigms, Technologies, or a class of such platforms. The platform is listed along with how frequently the given weakness appears for that instance.

Languages

Class: Not Language-Specific (Undetermined Prevalence)

Operating Systems

Class: Not OS-Specific (Undetermined Prevalence)

Architectures

Class: Not Architecture-Specific (Undetermined Prevalence)

Technologies

Class: Not Technology-Specific (Undetermined Prevalence)

+ Demonstrative Examples

Example 1

Many SoCs use hardware to partition system resources between trusted and un-trusted entities. One example of this concept is the Arm TrustZone, in which the processor and all security-aware IP attempt to isolate resources based on the status of a privilege bit. This privilege bit is part of the input interface in all TrustZone-aware IP. If this privilege bit is accidentally grounded or left unconnected when the IP is instantiated, privilege escalation of all input data may occur.

(bad code)
Example Language: Verilog 
// IP definition
module tz_peripheral(clk, reset, data_in, data_in_security_level, ...);
input clk, reset;
input [31:0] data_in;
input data_in_security_level;
...
endmodule
// Instantiation of IP in a parent system
module soc(...)
...
tz_peripheral u_tz_peripheral(
.clk(clk),
.rst(rst),
.data_in(rdata),
//Copy-and-paste error or typo grounds data_in_security_level (in this example 0=secure, 1=non-secure) effectively promoting all data to "secure")
.data_in_security_level(1'b0),
);
...
endmodule

In the Verilog code below, the security level input to the TrustZone aware peripheral is correctly driven by an appropriate signal instead of being grounded.

(good code)
Example Language: Verilog 
// Instantiation of IP in a parent system
module soc(...)
...
tz_peripheral u_tz_peripheral(
.clk(clk),
.rst(rst),
.data_in(rdata),
// This port is no longer grounded, but instead driven by the appropriate signal
.data_in_security_level(rdata_security_level),
);
...
endmodule

Example 2

Here is a code snippet from the Ariane core module in the HACK@DAC'21 Openpiton SoC [REF-1362]. To ensure full functional correctness, developers connect the ports with names. However, in some cases developers forget to connect some of these ports to the desired signals in the parent module. These mistakes by developers can lead to incorrect functional behavior or, in some cases, introduce security vulnerabilities.

(bad code)
Example Language: Verilog 
...
csr_regfile #(
...
) csr_regfile_i (
.flush_o ( flush_csr_ctrl ),
.halt_csr_o ( halt_csr_ctrl ),
...
.irq_i(),
.time_irq_i(),
.*
);
...

In the above example from HACK@DAC'21, since interrupt signals are not properly connected, the CSR module will fail to send notifications in the event of interrupts. Consequently, critical information in CSR registers that should be flushed or modified in response to an interrupt won't be updated. These vulnerabilities can potentially result in information leakage across various privilege levels.

To address the aforementioned vulnerability, developers must follow a two-step approach. First, they should ensure that all module signals are properly connected. This can often be facilitated using automated tools, and many simulators and sanitizer tools issue warnings when a signal remains unconnected or floats. Second, it is imperative to validate that the signals connected to a module align with the specifications. In the provided example, the developer should establish the correct connection of interrupt signals from the parent module (Ariane core) to the child module (csr_regfile) [REF-1363].

(good code)
Example Language: Verilog 
...
csr_regfile #(
...
) csr_regfile_i (
.flush_o ( flush_csr_ctrl ),
.halt_csr_o ( halt_csr_ctrl ),
...
.irq_i (irq_i),
.time_irq_i (time_irq_i),
.*
);
...

+ Memberships
Section HelpThis MemberOf Relationships table shows additional CWE Categories and Views that reference this weakness as a member. This information is often useful in understanding where a weakness fits within the context of external information sources.
NatureTypeIDName
MemberOfCategoryCategory - a CWE entry that contains a set of other entries that share a common characteristic.1396Comprehensive Categorization: Access Control
+ Vulnerability Mapping Notes

Usage: ALLOWED

(this CWE ID could be used to map to real-world vulnerabilities)

Reason: Acceptable-Use

Rationale:

This CWE entry is at the Base level of abstraction, which is a preferred level of abstraction for mapping to the root causes of vulnerabilities.

Comments:

Carefully read both the name and description to ensure that this mapping is an appropriate fit. Do not try to 'force' a mapping to a lower-level Base/Variant simply to comply with this preferred level of abstraction.
+ Content History
+ Submissions
Submission DateSubmitterOrganization
2020-05-22
(CWE 4.1, 2020-02-24)
Nicole FernTortuga Logic
+ Contributions
Contribution DateContributorOrganization
2023-06-21Chen Chen, Rahul Kande, Jeyavijayan RajendranTexas A&M University
suggested demonstrative example
2023-06-21Shaza Zeitouni, Mohamadreza Rostami, Ahmad-Reza SadeghiTechnical University of Darmstadt
suggested demonstrative example
+ Modifications
Modification DateModifierOrganization
2020-08-20CWE Content TeamMITRE
updated Demonstrative_Examples, Description, Modes_of_Introduction, Name, Potential_Mitigations
2022-10-13CWE Content TeamMITRE
updated Demonstrative_Examples
2023-04-27CWE Content TeamMITRE
updated Relationships
2023-06-29CWE Content TeamMITRE
updated Mapping_Notes
2023-10-26CWE Content TeamMITRE
updated Demonstrative_Examples, References
+ Previous Entry Names
Change DatePrevious Entry Name
2020-08-20Hardware Block Incorrectly Connected to Larger System
Page Last Updated: July 16, 2024